HK MP5 22LR FRT
PRODUCT DETAILS
THIS IS A FRT (FORCED RESET TRIGGER) FOR THE HK MP5 22LR.
COMPATIBILITY WITH HK CLONES HAS NOT BEEN VERIFIED.
WHAT YOU GET:
– (1x) HK MP5 22LR FRT (316 STAINLESS STEEL)
– (2x) HK MP5 22LR PRACTICE / TEST FITMENT FRT (PET-CF)
*STEEL PARTS ARE FIBER LASER CUT, THEN DEBURRED WITH 400 GRIT, FOLLOWED BY 12 HOURS OF TUMBLING IN STEEL PINS TO REMOVE ANY REMAINING BURRS, WHICH LEAVES A NICE PEENED FINISH.
*PET-CF IS A CARBON FIBER REINFORCED POLYESTER FILAMENT THAT IS CONSIDERED ONE OF THE BEST CHOICES FOR 3D PRINTING FIREARM RELATED PARTS DUE TO ITS HIGH STRENGTH, DURABILITY, AND HEAT RESISTANCE
NOT A DROP IN PART. THIS PRODUCT WILL REQUIRE A BIT OF FABRICATION TO GET IT TO STAY IN PLACE AND TUNING TO MAKE IT RUN RELIABLY.
I INCLUDE 2 THAT ARE 3D PRINTED FOR YOU TO PRACTICE/TEST MODIFY FOR FUNCTIONALITY BEFORE DOING THE SAME TO THE STEEL PART.
YOU HAVE TO BE A BIT CREATIVE HERE, YOU NEED TO FIND A WAY TO KEEP IT ON THE TRIGGER BAR, FOR EXAMPLE A STRIP OF SHIM STOCK CAN BE TACK WELDED TO ONE SIDE OF THE FRT AND THEN TO THE BACK OF THE TRIGGER, ALLOWING IT TO PIVOT BUT NOT COME LOOSE. OR MAYBE YOU CAN WRAP THE SHIM AROUND THE TRIGGER BAR AND TACK IT TO THE OPPOSITE SIDE OF THE FRT ITSELF, IF YOU HAVE THE CLEARANCE.
THESE PARTS HAVE BEEN VERIFIED TO WORK IF MODIFIED AND INSTALLED PROPERLY.
NO REFUNDS WILL BE GIVEN BECAUSE YOU ARE UNABLE TO ACHEIVE FUNCTIONALITY.
THERE IS VERY LITTLE IF ANY DOCUMENTATION ON THIS ITEM.
I DO NOT PROVIDE INSTALLATION ASSISTANCE FOR LIABILITY REASONS.
IF YOU REQUIRE INSTALLATION ASSISTANCE PLEASE SEEK HELP FROM A QUALIFIED GUNSMITH.
THESE PARTS ARE SOLD AS IS. ALL SALES FINAL.
VIEW VIEW OUR WIDE SELECTION OF FORCED RESET TRIGGERS HERE.
