CMMG 22LR AR22 RARE BREED & WOT FRT RELIABILITY KIT
PRODUCT DETAILS
CMMG AR-22 22LR SUPER SAFETY SUPER SELEKTOR FRT RELIABILITY KIT
DESIGNED TO FIT MOST DEDICATED RIFLES AND CONVERSION KITS WITH A BOREBUDDY/CMMG/RTB/PSA/CIENER STYLE BOLT
THIS KIT COMES WITH EVERYTHING NEEDED TO MAKE YOUR AR-22 RUN RELIABLY WITH A SUPER SAFETY / SUPER SELEKTOR BESIDES A BOLT WEIGHT
AN ADJUSTABLE BOLT WEIGHT IS RECOMMENDED FOR FINE TUNING / ELIMINATING BOLT BOUNCE
WHAT YOU GET:
– (1x) TRIP SLED FOR USE WITH RARE BREED / WOT / PARTISAN DISRUPTOR FRT (PET-CF)
– (2x) BOLT BUFFERS – BOLT BUFFERS PREVENT THE BOLT FROM SLAMMING INTO THE BACKPLATE WHEN THE RIFLE IS FIRED. THIS REDUCES THE NOISE GENERATED BY THE CYCLING OF THE BOLT AND REDUCES WEAR AND TEAR TO THE BOLT AND THE LOWER RECEIVER. WHEN SHOOTING SUPPRESSED, A NOTICEABLE DECREASE IN SOUND LEVEL HAS BEEN REPORTED. THESE BOLT BUFFERS SHOULD LAST THOUSANDS OF ROUNDS EACH, BUT ARE A CONSUMABLE PART, MEANING THEY WILL EVENTUALLY WEAR OUT AND NEED TO BE REPLACED. FOR BEST BUFFER LIFE, USE OF A BOLT WEIGHT IS HIGHLY RECOMMENDED. (PLA PRO)
– (1x) BUFFER PRESSURE PLUG – PROVIDES PRESSURE AGAINST THE BACK OF THE 22LR BOLT CARRIER GROUP AND INCREASES RELIABILITY OF BOTH CONVERSIONS AND DEDICATED 22LR UPPERS. OUR NOVEL QUICK INSERT DESIGN ALLOWS FOR ONE-HANDED INSERTION AND REMOVAL WITHOUT THE NEED FOR TOOLS. CAN BE PLACED IN FRONT OF YOUR EXISTING BUFFER OR IT CAN REPLACE IT FOR A BIT OF WEIGHT REDUCTION, YOUR CHOICE, EITHER WAY WILL WORK. (PLA-PRO)
– (1x) CHARGING HANDLE INSERT – THIS INNOVATIVE CHARGING HANDLE INSERT REDUCES MALFUNCTIONS AND GAS BLOWBACK. (MAY REQUIRE MINOR SANDING/FITTING) (PET-CF)
– (1X) DRY FIRE BLOCK – THIS SAFE-FIRE DRY FIRE PRACTICE BLOCK PREVENTS THE HAMMER FROM HITTING THE FIRING PIN FOR SAFE TRIGGER PULL PRACTICE WITHOUT RISK OF DAMAGE TO YOUR FIRING PIN. (PLA PRO)
THE BLOCK MUST BE INSTALLED WITH THE HAMMER COCKED ON THE LOWER. MULTIPLE DRY FIRES WITH THE SAFE-FIRE BLOCK INSTALLED CAN BE DONE BY RACKING THE CHARGING HANDLE TO RESET THE HAMMER, AS USUAL.
*PET-CF IS A CARBON FIBER REINFORCED POLYESTER FILAMENT THAT IS CONSIDERED ONE OF THE BEST CHOICES FOR 3D PRINTING FIREARM RELATED PARTS DUE TO ITS HIGH STRENGTH, DURABILITY, AND HEAT RESISTANCE
*PLA PRO (OR PLA+) IS A POLYMER FILAMENT THAT IS TOUGH AND DURABLE MAKING IT POPULAR FOR FUNCTIONAL PARTS THAT TAKE A BEATING.
THESE TRIPS ARE HIGHLY SENSITIVE AND TEMPERAMENTAL ON THIS PLATFORM, WITH NO
UNIVERSAL CONFIGURATION FOR BOLT WEIGHT, BARREL LENGTH, OR OTHER PARAMETERS.
THEREFORE, IF YOU ENCOUNTER ISSUES SUCH AS HAMMER FOLLOW, FAILURE TO RESET, OR ANY OTHER MALFUNCTION THERE ARE
NUMEROUS USERS ON R/SUPERSAFETY OR IN THE BROADER FOSSCAD COMMUNITY HAVE ADDRESSED SIMILAR TUNING CHALLENGES
DISCLAIMER:
All 3D printed parts are sold as-is. Due to manufacturing and material variability, performance and lifespan are not guaranteed (no specific round count or durability promised). No refunds, exchanges, or returns on used or installed items. By purchasing you accept these terms and use the parts at your own risk.
VIEW VIEW OUR WIDE SELECTION OF FORCED RESET TRIGGERS HERE.
