TX22 FRT Install Block – Solid PLA+ sear housing block / sear pin block for the Taurus TX22. Holds the sear housing stable for pin removal and pin installation when swapping a disconnector or installing an FRT.
TX22 SEAR HOUSING BLOCK | FRT INSTALL BLOCK
Taurus TX22 FRT Install Tool — Solid PLA+ Construction
PRODUCT DETAILS
This TX22 sear housing block (also called a sear pin block or FRT install block) supports the TX22 sear housing while you remove or install the sear pin.
It makes swapping the factory disconnector for an FRT, or replacing the factory disconnector, much easier and more controlled.
It is a 1/2″ thick rectangular block of solid 3D-printed PLA+ with left-side and right-side cutouts of the sear housing.
The housing almost snaps into the pocket and stays put so you can use a punch and hammer without chasing the part across the bench.
Use one cutout to hold the housing for pin removal. Flip the block and use the other cutout to hold it for pin installation after the disconnector has been swapped.
Unlike thinner / hollow-style blocks on the market, this one is solid with no weak spots. It is built to be more rugged and heavy-duty for repeated bench use.
WHAT YOU GET
- (1x) TX22 Sear Housing Block / FRT Install Block — Solid PLA+
Punch, sear housing, and FRT / disconnector not included.
HOW IT HELPS
- Holds the sear housing stable during pin work
- Separate pockets for pin removal and pin installation
- Reduces slipping and missed punches
- Makes FRT or disconnector swaps simpler
- Solid PLA+ body — no thin flex spots
COMPATIBILITY
Designed for Taurus TX22 sear housings (Gen 1 and Gen 2 style housings that use the standard sear pin layout).
Useful when installing a TX22 FRT or replacing the factory disconnector.
MATERIAL DETAILS
3D printed in solid PLA+.
- 1/2″ thick rectangular block
- Solid construction (not a thin-walled / finger-style block)
- Left and right housing cutouts
IMPORTANT INFORMATION
- This is an installation aid only — it is not an FRT
- Punch and hammer still required
- No installation assistance is provided beyond the information on this page
- If additional help is needed, consult a qualified gunsmith
DISCLAIMER
All 3D printed parts are sold as-is. Due to manufacturing and material variability, performance and lifespan are not guaranteed. A break-in period or light sanding may be required for fitment on some housings. No refunds, exchanges, or returns on used or installed items. By purchasing you accept these terms and use the parts at your own risk.
VIEW OUR WIDE SELECTION OF FORCED RESET TRIGGERS HERE.
COMPATIBILITY / SEARCH TERMS
TX22 FRT install block
TX22 sear housing block
TX22 sear pin block
Taurus TX22 installation block
TX22 FRT tool
TX22 disconnector install tool
TX22 trigger group block
